南宫市特金焊接材料有限公司
品牌 |
ATLANTIC/大西洋 |
型号 |
多种 |
类型 |
铬镍不锈钢焊条 |
材质 |
不锈钢 |
药皮成分 |
其他 |
Z308上海斯米克铸铁焊条 钢芯铸铁冷焊焊条 ENi-Cl铸铁焊条
Category 类别
|
Trade- Mark 牌号
|
Equivalent to China Standard 相当国标
|
Characteristics & application 特性和用途
|
Equivalent to AWS 相当AWS
|
Hard-surfacing 硬 面 堆 焊
|
D 667
|
EDZCr-B-15
|
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part. HRc≥48,耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件
| |
D 802
|
EDCoCr-A-03
|
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter. HRc38-47,耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃
|
ECoCr-A
| |
D 812
|
EDCoCr-B-03
|
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve. HRc45-50,耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀
|
ECoCr-B
| |
D 822
|
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler. HRc≥53,耐热、耐磨,但抗冲击性差。堆焊锅炉旋转叶轮
| |||
D 832
|
EDCoCr-C-03
|
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way. HRc≥50,耐热、耐磨。堆焊高温工件如热轧导轨
|
ECoCr-C
| |
D 842
|
EDCoCr-D-03
|
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die. HRc28-38,耐蚀、抗热疲劳,具有加工硬化性。堆焊热锻模
| ||
Cast iron 铸 铁
|
Z 308
|
EZNi
|
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool. 纯镍,综合性能好。铸铁薄件及加工面补焊用,如机床导卫
|
ENi-Cl
|
Z 408
|
EZNiFe
|
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap. 镍铁,强度高、塑性好。重要灰铸铁及球铁焊补用,如汽缸盖
|
ENiFe-Cl
| |
Z 508
|
EZNiCu-1
|
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load. 镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊
|
ENiCu-B
| |
Copper alloys 铜 合 金
|
Cu 107
|
ECu
|
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row. 紫铜,耐大气,海水腐蚀,导电性好。紫铜焊接用,如导电铜排
|
ECu
|
Cu 207
|
ECuSi
|
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 硅青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用
|
ECuSi
| |
Cu 227
|
ECuSnB
|
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 锡磷青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用
|
ECuSn-C
| |
Cu 237
|
ECuAl
|
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys. 铝青铜,耐磨、耐蚀,强度高。铜合金焊接或堆焊用
|
ECuAl-A2
| |
Aluminum alloys 铝 合 金
|
Al 109
|
TAl
|
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum. 纯铝,耐蚀性好,但强度不高,纯铝焊接用
|
E1100
|
Al 209
|
TAlSi
|
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys. 铝硅,抗裂性好,通用性大。铝合金焊接用,不宜焊接铝镁合金
|
E4043
| |
Al 309
|
TAMn
|
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys. 铝锰,强度高,耐蚀。铝合金焊接用
|
E3003
| |
Nickel alloys 镍合金
|
Ni 102
|
ENi-1
|
Pure nickel. Welding and surfacing of nickel and nickel to steel. 纯镍,用于镍、镍与钢的焊接与堆焊
|
ENi-1
|
Ni 207
|
ENiCu-7
|
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel. 镍铜,用于镍铜、镍铜与钢的焊接与堆焊
|
ENiCu-7
|
河北邢台市南宫市工业区268号
期待你的来电